New Dink for our Mainship 30 Rum Runner

Add caption
Bought this "Beachcomber" sailing dingy to use on the new boat. 80+ yr old man in North Ft Meyers sailed it on the river here.
I have not sailed it as of today. We did row out into the mangroves twice. The keel makes it easy to row. The boat is Tippy and might turn turtle in a rough water or two people on one side.

We had a walker bay, that proved to be not such a good dink for the big boat, nor was it a good sailboat. This is almost the same. 

The sail is new last year. If we attach an engine or trolling motor then Florida wants it registered. 

The dink weighs about 100#s  and fits the davits well. 

Went fishing offshore with a neighbor.  

Comments

Post a Comment

Popular posts from this blog

Cuban Landing @ The Dry Tortugas

Image
In the 1840s this pre-Civil War fort protected the Gulf of Mexico from foreign invasion. How is that working out for you? If we rely on the government for answers to our problems we get government answers. Pray for our families and neighbors. Care for one another, 1 John 3:23 is the one we have the most trouble with, the rest is religion. Semper Fi! Fort Jefferson, Dry Tortugas 70 miles West of Key West http://www.nps.gov/drto/index.htm Sailing Vessel Kanza  Two of my friends agreed to go for a sail with me to the Dry Tortugas in June of 2005. I had made six trips to the Keys (See  http://en.wikipedia.org/wiki/Conch_Republic  )  and the Dry Tortugas during the summers before with my sailing friend Dale Fasenmyer and one trip with my wife, Jean and sons. This year looked about the same weather wise. Yes, I know that is hurricane season, but we all were teachers and summer was our only time off work. Dale, Michael Smith, another teacher friend and I packed the Island Pac
Read more

2001 Mainship 30 Pilot, Steps to operate

Image
/ Steps to operate 2001 Mainship 30 1. Open seacock for the main engine and watch for water flow after starting. Pull the black ball to open the seacock on the strainer for mains. Shut down immediately if no water flows out telltale. 2. Open the main fuel valve on Port topside of the tank for main engine fuel flow to yellow switch valve, open black valve, and close the two primer valves to run main. Genset fuel cut is on the Starboard topside of tank with a separate filter system. Fuel system allows the operator to select the filter and prime without stopping if offshore 3. In-cabin, Remove steps, turn on bilge light and switch open valves for seacocks to feed seawater to Air Conditioner and Generator. Do not open "Flush Valves" to run AC or Genny.  Seacocks for AC and Genny are shown open. Close after use! Light switch on galley panel. 4. If the head is to be used open seacock for the head, Macerator seacock is closed! Breaker for electric head an
Read more

Needed a few parts for the Cummins Engine in the Mainship

Image
Needed a few parts for my 30 Mainship. The engine is a 4TBA3.9M Cummins. I had worked on Yanmars and even taught Yanmars as an instructor. I started Diesel service in the Marines on Hercules Diesels.  I was buying parts online and saw that Cummins had a dealer Network so I located the local Cummins parts dealer (I always try to develop a sustainable local resource for my parts) and looked at the website and couldn't find any way to get a parts price other than phoning so assuming and that's my mistake for trusting and assuming the parts prices would be the same across the board if they were anything like  Yanmar or Yamaha, their dealer Network that I had accounts with before when I was an active technician. Cummins dealers online kept coming up with a Seaboard dealer ( https://www.sbmar.com/product-category/maintenance/aftercooler-heat-exchanger-maintenance-kits/ )  in California and they had some interesting videos and a lot of information. I asked them
Read more